版本 66ce3d3af89fd9e9937acaaff9d5621341bfba0c
Changes from 66ce3d3af89fd9e9937acaaff9d5621341bfba0c to 99d4e783ed86df74fb5667c58dc032db4061e1c2
---
title: nuttx
categories: embedded, arm, stm32, stm32f429
toc: no
...
組員
----
* 翁振育
* 黃亮穎
* 蘇偉嘉
* 李英碩
Nuttx 參考應用
---------------
* `PX4 autopilot<http://pixhawk.org/dev/nuttx/start>`_
NuttX 架構
------------
＊ 可混用task跟thread。
＊ 支援FPU。
＊ 可混用FIFO跟RR。
與平台相關
------------
Run Nuttx on STM32F429-Disco
----------------------------------------------
| (1) 從 https://github.com/deadbeefcafe/nuttx-stm32f4disc-bb 複製Nuttx到workspace
| (2) cd workspace/nuttx-stm32f4disc-bb/nuttx/tools
| (3) ./configure.sh stm32f429i-disco/nsh
| (4) cd ..
| (5) make CROSSDEV=arm-none-eabi-
| (6) st-flash write nuttx.bin 0x8000000
| (7) sudo screen /dev/ttyUSB0 115200 8n1
Task state
------------
.. code-block:: c
enum tstate_e
{
TSTATE_TASK_INVALID = 0, /* INVALID - The TCB is uninitialized */
TSTATE_TASK_PENDING, /* READY_TO_RUN - Pending preemption unlock */
TSTATE_TASK_READYTORUN, /* READY-TO-RUN - But not running */
TSTATE_TASK_RUNNING, /* READY_TO_RUN - And running */
TSTATE_TASK_INACTIVE, /* BLOCKED - Initialized but not yet activated */
TSTATE_WAIT_SEM, /* BLOCKED - Waiting for a semaphore */
#ifndef CONFIG_DISABLE_SIGNALS
TSTATE_WAIT_SIG, /* BLOCKED - Waiting for a signal */
#endif
#ifndef CONFIG_DISABLE_MQUEUE
TSTATE_WAIT_MQNOTEMPTY, /* BLOCKED - Waiting for a MQ to become not empty. */
TSTATE_WAIT_MQNOTFULL, /* BLOCKED - Waiting for a MQ to become not full. */
#endif
#ifdef CONFIG_PAGING
TSTATE_WAIT_PAGEFILL, /* BLOCKED - Waiting for page fill */
#endif
NUM_TASK_STATES /* Must be last */
};
Task list
------------
.. code-block:: c
typedef struct tasklist_s tasklist_t;
extern volatile dq_queue_t g_readytorun;
extern volatile dq_queue_t g_pendingtasks;
extern volatile dq_queue_t g_waitingforsemaphore;
#ifndef CONFIG_DISABLE_SIGNALS
extern volatile dq_queue_t g_waitingforsignal;
#endif
#ifndef CONFIG_DISABLE_MQUEUE
extern volatile dq_queue_t g_waitingformqnotempty;
#endif
#ifndef CONFIG_DISABLE_MQUEUE
extern volatile dq_queue_t g_waitingformqnotfull;
#endif
#ifdef CONFIG_PAGING
extern volatile dq_queue_t g_waitingforfill;
#endif
extern volatile dq_queue_t g_inactivetasks;
extern volatile sq_queue_t g_delayed_kufree;
#if defined(CONFIG_NUTTX_KERNEL) && defined(CONFIG_MM_KERNEL_HEAP)
extern volatile sq_queue_t g_delayed_kfree;
#endif
extern volatile pid_t g_lastpid;
extern pidhash_t g_pidhash[CONFIG_MAX_TASKS];
extern const tasklist_t g_tasklisttable[NUM_TASK_STATES];
TCB
------------
.. code-block:: c
struct tcb_s
{
/* Fields used to support list management *************************************/
FAR struct tcb_s *flink; /* Doubly linked list */
FAR struct tcb_s *blink;
/* Task Management Fields *****************************************************/
pid_t pid; /* This is the ID of the thread */
start_t start; /* Thread start function */
entry_t entry; /* Entry Point into the thread */
uint8_t sched_priority; /* Current priority of the thread */
uint8_t task_state; /* Current state of the thread */
uint16_t flags; /* Misc. general status flags */
int16_t lockcount; /* 0=preemptable (not-locked) */
#if CONFIG_RR_INTERVAL > 0
int timeslice; /* RR timeslice interval remaining */
#endif
/* Stack-Related Fields *******************************************************/
#ifndef CONFIG_CUSTOM_STACK
size_t adj_stack_size; /* Stack size after adjustment */
/* for hardware, processor, etc. */
/* (for debug purposes only) */
FAR void *stack_alloc_ptr; /* Pointer to allocated stack */
/* Need to deallocate stack */
FAR void *adj_stack_ptr; /* Adjusted stack_alloc_ptr for HW */
/* The initial stack pointer value */
#endif
/* POSIX Semaphore Control Fields *********************************************/
sem_t *waitsem; /* Semaphore ID waiting on */
/* POSIX Signal Control Fields ************************************************/
#ifndef CONFIG_DISABLE_SIGNALS
sigset_t sigprocmask; /* Signals that are blocked */
sigset_t sigwaitmask; /* Waiting for pending signals */
sq_queue_t sigactionq; /* List of actions for signals */
sq_queue_t sigpendactionq; /* List of pending signal actions */
sq_queue_t sigpostedq; /* List of posted signals */
siginfo_t sigunbinfo; /* Signal info when task unblocked */
#endif
/* POSIX Named Message Queue Fields *******************************************/
#ifndef CONFIG_DISABLE_MQUEUE
FAR msgq_t *msgwaitq; /* Waiting for this message queue */
#endif
/* The form and content of these fields are processor-specific. */
struct xcptcontext xcp; /* Interrupt register save area */
#if CONFIG_TASK_NAME_SIZE > 0
char name[CONFIG_TASK_NAME_SIZE]; /* Task name */
#endif
:
:
:
:
:
:
};
Communication
---------------------
Scheduling
----------------
Interrupt handler
------------------------
測試環境架設
------------
硬體驅動原理
------------
* `UART<embedded/USART>`_
* FPU (Floating Point Unit)
效能表現
--------
參考資料
--------
* https://github.com/deadbeefcafe/nuttx-stm32f4disc-bb
* http://bibliodigital.itcr.ac.cr/xmlui/bitstream/handle/2238/3051/FinalReport.pdf
