版本 a2e7e8dd226ae0c23be576bd29b74a114703e026
Changes from a2e7e8dd226ae0c23be576bd29b74a114703e026 to 5759d9601751e119a0c5d7f29641c64efb354340
---
title: Xenomai
categories: embedded, arm, raspberrypi
toc: no
...
組員
----
* 向澐
* 林家宏
* 呂科進
* 趙愷文
* 阮志偉
* 陳建霖
Building an RPi Xenomai Kernel
------------------------------
* Install Cross complier
.. code-block:: c
cd <working dir>
wget https://github.com/raspberrypi/tools/archive/master.tar.gz
tar xzf master.tar.gz
* Download source files and patches
- Download kernel
.. code-block:: c
git clone -b rpi-3.8.y --depth 1 git://github.com/raspberrypi/linux.git linux-rpi-3.8.y
- Download Xenomai
.. code-block:: c
git clone git://git.xenomai.org/xenomai-head.git xenomai-head
- Download minimal config
.. code-block:: c
wget https://www.dropbox.com/s/dcju74md5sz45at/rpi_xenomai_config
* Apply patches
- Apply ipipe core pre-patch
.. code-block:: c
cd linux-rpi-3.8.y
patch -Np1 < ../xenomai-head/ksrc/arch/arm/patches/raspberry/ipipe-core-3.8.13-raspberry-pre-2.patch
- Apply Xenomai ipipe core patch
.. code-block:: c
xenomai-head/scripts/prepare-kernel.sh --arch=arm --linux=linux-rpi-3.8.y --adeos=xenomai-head/ksrc/arch/arm/patches/ipipe-core-3.8.13-arm-3.patch
- Apply ipipe core post-patch
.. code-block:: c
cd linux-rpi-3.8.y
patch -Np1 < ../xenomai-head/ksrc/arch/arm/patches/raspberry/ipipe-core-3.8.13-raspberry-post-2.patch
* Compile kernel
- Create build directory
.. code-block:: c
mkdir linux-rpi-3.8.y/build
- Configure kernel
.. code-block:: c
cp rpi_xenomai_config linux-rpi-3.8.y/build/.config
cd linux-rpi-3.8.y
make mrproper
make ARCH=arm O=build oldconfig
- Compile
.. code-block:: c
make ARCH=arm O=build CROSS_COMPILE=../../tools-master/arm-bcm2708/arm-bcm2708hardfp-linux-gnueabi/bin/arm-bcm2708hardfp-linux-gnueabi-
- Install modules
.. code-block:: c
make ARCH=arm O=build INSTALL_MOD_PATH=dist modules_install
- Install headers
.. code-block:: c
make ARCH=arm O=build INSTALL_HDR_PATH=dist headers_install
find build/dist/include \( -name .install -o -name ..install.cmd \) -delete
* 編譯好的kernelImage,移到SD卡的 ``/boot/`` 路徑下並更改名稱為kernel.img
* 將``linux-rpi-3.8.y/build/dist``中的Module,移到SD卡中的``/lib/modules``
* Cyclictest
- Linux
.. code-block:: c
- Xenomai
.. code-block:: c
cd xenomai-head
export PATH=<your path>/tools-master/arm-bcm2708/arm-bcm2708hardfp-linux-gnueabi/bin/:$PATH
./configure --host=arm-bcm2708hardfp-linux-gnueabi
cd src
mkdir dist
make install DIST_DIR=dist
dist中會出現``usr/xenomai``
將這個資料夾移到sd卡中 ``/usr/``
在raspberry pi中
.. code-block:: c
export PATH=/usr/xenomai/bin:$PATH
export LD_LIBRARY_PATH=/usr/xenomai/lib
sudo modprobe xeno_posix
接著就能跑使用xenomai機制的cyclictest
- RT_preempt
作業系統架構
------------
* 與 RT-PREEMPT 途徑的差異？
nucleus 編出來的.o檔中關於sched的有
- xenomai/nucleus/sched-rt.o
- xenomai/nucleus/sched-idle.o
- xenomai/nucleus/sched.o
因此在nucleus source code中
- sched-tp.c
- sched-sporadic.c
這兩個應該是沒被用到
硬體驅動原理
------------
* 硬體使用 Raspberry Pi
效能表現
--------
* `Cyclictest<https://rt.wiki.kernel.org/index.php/Cyclictest>`_
* Test case: POSIX interval timer, Interval 500 micro seconds,. 100000 loops, 100% load.
- Commandline: cyclictest -t1 -p 80 -i 500 -l 100000
* 使用 PREEMPT LINUX
.. code-block:: prettyprint
root@raspberrypi:/home/pi# sudo ./cyclictest -t1 -p 80 -i 500 -l 100000
# /dev/cpu_dma_latency set to 0us
policy: fifo: loadavg: 0.00 0.01 0.05 1/61 2064
T: 0 ( 2063) P:80 I:500 C: 100000 Min: 27 Act: 49 Avg: 42 Max: 1060
* 使用 RT-PREEMPT
.. code-block:: prettyprint
Linux raspberrypi 3.6.11+ #474 PREEMPT Thu Jun 13 17:14:42 BST 2013 armv6l GNU/Linux
Min: 22 Act: 31 Avg: 32 Max: 169
* 使用 Xenomai
.. code-block:: prettyprint
Linux raspberrypi 3.8.13-core+ #1 Thu Feb 27 03:02:16 CST 2014 armv6l GNU/Linux
Min: 1 Act: 5 Avg: 6 Max: 41
.. code-block:: prettyprint
root@raspberrypi:/home/pi# /usr/xenomai/bin/cyclictest -t1 -p 80 -i 500 -l 10000
0.08 0.06 0.05 1/61 2060
T: 0 ( 2060) P:80 I: 500 C: 100000 Min: -4 Act: -2 Avg: 0 Max: 30
* cyclictest 做法
概念:
取得現在時間接著讓process睡一個間隔
等process醒來後再取一次時間
比對兩次取得的時間差與設定的間隔差距
pseudocode:
.. code-block:: prettyprint
clock_gettime((&now))
next = now + par->interval
while (!shutdown) {
clock_nanosleep((&next))
clock_gettime((&now))
diff = calcdiff(now, next)
# update stat-> min, max, total latency, cycles
# update the histogram data
next += interval
}
造成這時間差的可能原因:
timer精準度
interrupt latency
interrupt handler duration
scheduler latency
scheduler duration
context switch
討論用
--------
https://embedded2014.hackpad.com/Xenomai-raspberry-note-XwJtuQn9nkD
參考資料
--------
* https://code.google.com/p/picnc/wiki/RPiXenomaiKernel
* https://code.google.com/p/picnc/wiki/CreateRaspbianLinuxCNC
* http://www.camelsoftware.com/firetail/blog/raspberry-pi/real-time-operating-systems/
* `Quadruped Linux robot feels its way over obstacles<http://linuxgizmos.com/hyq-quadruped-robot-runs-real-time-linux/>`_
* ` Choosing between Xenomai and Linux for real-time applications<https://www.osadl.org/fileadmin/dam/rtlws/12/Brown.pdf>`_
* `Real Time Systems<http://www.slideshare.net/anil_pugalia/real-time-systems>`_
* `http://www.cs.ru.nl/lab/xenomai/exercises/`_
